25″ Planer – 15 HP 3 Ph 230/460V – Helical Cutterhead – WP2510

Description

• Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, reduces sound levels
• Digital readout and simple PC controller make quick and easy table height set ups
• Segmented serrated infeed roll with segmented chip breakers has 1/4″ independent yield, for planing multiple height stock
• Massive gear box maintains positive feed by using a large chain drive with automatic chain tensioners, to power infeed and outfeed rollers
• 3″ diameter infeed and outfeed rollers are supported by four large, sealed, needle bearings for long life
• Quick-Set micro-adjustable lever easily raises and lowers table rollers from 0″ to 0.050″ at a touch
• Frame machined from heavy cast iron and extra wide side panels with gibs, offers rigid bed support and accurate alignment
• Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding
• 3 speed feed selector allows you to quickly change feed rates
• Large 32-3/16 x 26 precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
• Dust hood features built-in 5″ dust chute for efficient dust collection
• Helical head with four sided inserts
• Dust hood with 5″ diameter dust port
• Segmented infeed rollers
• Segmented chip breakers
• Tool kit with pneumatic screwdriver for removing the cutterhead insert blades
• Bed Rollers Adjustable from Front : 0″ to 0.05″
• Column Diameter (in) : 2-1/2
• Cuts Per Minute : 30000
• Cutterhead Diameter (in) : 3-3/8
• Cutterhead Speed (RPM) : 5000
• Dust Collection Minimum CFM Required : 600
• Dust Port Diameter (OD/in) : 5
• Feed Rate (FPM) : 30-25-20
• Height (in): 59
• Length (in): 52
• Maximum Depth of Cut (in) : 1/4
• Maximum Full Width Depth of Cut (in) : 1/8
• Maximum Height of Rollers Parallel to Tabletop (in) : 0.05″
• Maximum Planing Thickness (in) : 9
• Maximum Planing Width (in) : 25
• Minimum Planing Length (in) : 10
• Model Number : WP2510
• Motor HP : 15HP
• Motor Phase : 3Ph
• Motor Voltage : 230/460V
• Net Weight (lb): 1,725
• Number of Knives : 168 Four-sided inserts
• Outfeed Roller Diameter (in) : 3
• Overall Dimensions : 52 x 36 x 59
• Part Number : 1791303
• Prewired : Prewired 230V
• Readout Scale : in/mm
• Rollers (in) : (1) infeed, (2) outfeed
• Rotation (Forward/Reverse) : Fwd only
• Segmented Infeed Roller Diameter (in) : 3
• Table Height Adjust Manual : 1 handwheel revolution = 1/32″
• Table Size (in) : 32-3/16 x 26
• Table Support : 2 column
• Tool Supplied : tool kit
• Width (in): 36
• Shipping weight 1,850 lb.

Shipping / Billing Information

All shipments must be inspected and any damage reported within 3 days of receipt.
Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges.
This product ships direct from the manufacturer:

• Your order will ship in 4 -7 approximately business days.
• This product is considered special order. Your account will be charged when you place your order.
• Express or overnight shipping is not available for this product.
• Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Return Information

All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.

Warranty Information

Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by .