Complete Razor Sharp System

Description

Absolutely the fastest, easiest way to put an edge on tools and knives weve seen. In fact, we were so impressed its still set up in our shop, used for all our tools. The Razor Sharp system is comprised of two laminated paper wheels, for either1/2 or 5/8 arbors, one for grinding and one for buffing. Use the silicon carbide grinding compound/ wax and jewelers rouge on the wheels for a mirror finish, while virtually eliminating any chance of bluing your tool. The system includes a grinding wheel, buffing wheel, silicon carbide for about 30 re-coatings, conditioning grease, jewelers rouge and instructions.
This system will put a polished razor sharp edge on your knives and tools in just seconds. It is made to be used on any ordinary six inch buffer or bench grinder motor that turns at least 3000 RPMs. THE WHEELS IN THIS KIT ARE EIGHT INCH BY THREE QUARTER INCH WITH A FIVE EIGHTHS INCH ARBOR HOLE. The installed bushing converts them to a one half inch arbor hole. Simply remove the bushings for use on a five eighths arbor. You will need to remove the bench grinder guards, as they are not needed with these paper wheels. You will sharpen many knives before needing to re-surface the grit wheel. The slotted wheel needs to be dressed occasionally with 60 grit sandpaper.
Instructions available.